How to apply

How To Apply Window Decal

Step 1 - Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2 – Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

Step 3 - Peel the stiff white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4 - Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.

Step 5 - Slowly peel the transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4. 

*Use a pin to poke any air bubbles in the center and push the air out through the hole.  For best results do not apply a sticker in extreme hot or cold temperatures.